Reptilia AUS Mount, 30 mm

Here is a top-tier single-piece cantilever scope mount for your rifle! The Reptilia AUS Mount is especially suited for AR-type rifles, where the mount attaches to the upper receiver's fixed Picatinny rail – cantilevered forward to allow for your eye relief preference.

• Very light
• Sturdy construction
• Compatible with accessories

This mount fits a 30-millimeter scope tube. There are two scope sight heights to accommodate your preference: 39 mm / 1.54" and 43 mm / 1.7" from the center of the bore. It comes in two colors: black and FDE.

Features

The Reptilia AUS Mount attaches to the Picatinny rail with spring-loaded steel clamps. You can tighten the screws with either a T25 Torx tool or a flat blade screwdriver (we recommend a Torx tool) – remember to press the mount downward and forward while tightening to keep it firmly in place despite recoil. The scope rings have T15 Torx screws. The mount is machined from a single piece of 7075-T6 aluminum and finished with MIL-STD Type III Class 2 hard anodized coating.

• Machined from 7075-T6 aluminum
• MIL-STD Type III Class 2 hardcoat anodized
• Weighs 158 g / 5.2 oz.
• Fits scopes with a 30 mm tube
• Two scope sight heights
• Fits scopes with up to 77 mm objective over a flat-top Picatinny rail
• Made in the USA

If you need an auxiliary red dot sight on your scope mount, the Reptilia AUS Mount is compatible with all 30-millimeter Reptilia ROF mounts, such as the ROF-90 and ROF-45.

Like all Reptilia products, the AUS Mount is made in the USA and comes with a lifetime warranty against defects in workmanship or material.

Recommended Torque Specs

What's torque, you ask? In firearm installations, it's advisable to follow the torque values provided by the manufacturers – that is, how tight the screws should be fastened. So, get yourself a torque wrench with a range of about 0-70 in-lbs / 0-8 Nm! As engraved on the scope mount, tighten the mounting clamp screws to 45 in-lbs / 5.1 Nm and the scope ring screws to 15 in-lbs / 1.7 Nm.